EMERSON INTELLISAW

Category / Series

24/7 Monitoring

The IntelliSAW solution provides continuous real-time temperature, humidity and partial discharge data.

Electrically isolated, solving potential arcing and flashover issues.

Can measure all relevant hot-spots simultaneously: bus bars, breaker inputs, breaker outputs and cables.

The passive self-powered SAW sensors require no batteries, so no need to access.

Up to 12 sensors can be used simultaneously in various configurations 4×3, 3×4, 6×2.

System can report directly into SCADA networks.

Specifications

Certifications

Video - picture

Documentations

Specifications

Wired	Infrared	Wireless	IntelliSAW
Invasive	Non-invasive	Non-invasive	Non-invasive
Continuous monitoring	Non-continuous monitoring	Continuous monitoring	Continuous monitoring
Arcing problems due to use of copper wire	Requires viewing windows Costs – $1k per window	Electrically isolated solves arcing issue	Electrically isolated solves arcing issue
Flashover problems if using fiber optics	Dirty environment cause conductive issues	Phải cấp nguồn chủ động Battery life typically < 2 years Required shutdown to replace	Passive SAW technology No battery required solves access & disposal issues
	Expensive equipment		Multi-protocol RS485, CAN, Modbus, IEC 61850
	Trained operator required with associated costs		Plug & Play implementation no maintenance required