Nơi Khách Hàng
Đặt Niềm Tin
Menu
Nơi Khách Hàng
Đặt Niềm Tin
Danh mục sản phẩm / Dòng sản phẩm
|
VẬT LIỆU
|
|
|---|---|
| Vỏ và Nắp che cửa sổ hồng ngoại | UL 94 5VA Nylon (switchgear-grade plastic); -40°C (-40°F) to 273°C (523°F); Easy-Grip™ stainless steel cover |
| Tấm phim quang học | UL 94 5VA TPE; -40°C (-40°F) to 273°C (523°F) |
| Ron | UL 94 5VA TPE; -40°C (-40°F) to 273°C (523°F) |
| Khung | 316 stainless steel |
|
CÁC ĐẶC ĐIỂM KHÁC
|
|
|---|---|
| Dải nhiệt độ sử dụng | -40°C (-40°F) to 200°C (392°F) |
| Chống Bụi và Nước | IP65 / NEMA 4: closed and when in use |
|
LỌAI
|
ĐƯỜNG KÍNH CỬA SỔ
|
ĐƯỜNG KÍNH MIỀN NHÌN
|
ĐỘ DÀY CỬA SỔ
|
|---|---|---|---|
| VPT-50 | 9.1 cm (3.6 in) | 5.1 cm (2.0 in) | 2.6 cm (1.0 in) |
| VPT-75 | 12.1 cm (4.8 in) | 7.6 cm (3.0 in) | 2.6 cm (1.0 in) |
| VPT-100 | 15.1 cm (5.95 in) | 10.2 cm (4.0 in) | 2.6 cm (1.0 in) |
|
American Bureau of Shipping [ABS] Approved
|
|---|
| Certificate No. 11-HS807296-PDA |
|
American Society of Testing and Materials (ASTM)
|
|
|---|---|
| ASTM F2281-2004 (2012) | Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws and Studs, for Heat Resistance and High Temperature Applications |
|
Canadian Standards Association (CSA)
|
|
|---|---|
| CSA-C22.2 No. 14-13 | Industrial Control Equipment – 12th Ed. |
| CSA-C22.2 No. 94-M91 | Special Purpose Enclosures – 4th Ed. |
| CSA-C22.2 No. 94.1-07 | Enclosures for Electrical Equipment |
| CSA-C22.2 No. 94.2-07 | Enclosures for Electrical Equipment |
|
Det Norske Veritas (DNV) GL
|
|
|---|---|
| P261.1E | Maritime, Vessel and Offshore Applications Approved |
|
Institute of Electrical and Electronics Engineers (IEEE)
|
|
|---|---|
| IEEE C37.20.2.a.3.6 | Mandatory impact and load test requirements for visual viewing panes for Metal-Clad and Station Type Cubicle Switchgear |
|
International Electrochemical Commission (IEC, IP Code)
|
|
|---|---|
| IP65/NEMA 4 | Enclosures constructed for either indoor or outdoor use to provide a degree of protection to personnel against incidental contact with the enclosed equipment |
| IP22/IP2X | Minimum requirements for the design of electrical accessories for indoor use |
| ANSI/IEC 60529-2004 (R2011) | Degrees of Protection Provided by Enclosures (IP Code 65) |
|
International Standards Organization (ISO)
|
|
|---|---|
| ISO 9001:2008 Certificate No. 74 300 3797 | |
|
Lloyd’s of London
|
|---|
| Certificate No. 05/00026 |
|
National Electrical Manufacturers Association (NEMA)
|
|---|
|
Type 1 Type 3: Viewport may be marked Rain-tight Type 3R: Viewport may be marked Rainproof Type 2, 5, 12, 12K and 13: Viewport may be marked Drip-tight or Dust-tight Ratings above are when installed on a flat surface of a suitably rated enclosure. |
|
Underwriter’s Laboratories (UL) and Canadian Underwriters Laboratories (cUL)
|
|
|---|---|
| UL 50V | Infrared Viewports |
| UL 50E | Enclosures for Electrical Equipment, Environmental Considerations |
| UL 746C | Polymeric Materials – Use in Electrical Equipment Evaluations |
| UL 1558 | Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear |
| UL 508A/ANSI UL 508A | Industrial Control Panels |
| UL 94-2013 | Tests for Flammability of Plastic Materials for Parts in Devices and Appliances |
| UL 746A-2012 | Polymeric Materials – Short Term Property Evaluations |
|
Arc Containment Tested
|
|
|---|---|
| IEC 62271-200 | Arc Flash Spectest 1.1 Second Duration |
| IEC 60262271-200 | 63kA, 15kV for 30 cycles at 60Hz |
| IEC 60298 Appendix A | 63kA, 15kV for 30 cycles at 60Hz |
| IEE C37.20.7 Type 2B | 63kA, 15kV for 30 cycler at 60Hz |
Product Data Sheet – VPT Series
Product Specification Sheet – VPT Series
Product Installation Guide – VPT Series
CÔNG TY TNHH THƯƠNG MẠI DỊCH VỤ KỸ THUẬT NHẬT HẠ
Về Nhật Hạ
Kết nối với chúng tôi
